One 3 X 4 Switch Plus with Two 1 X 4 Switches

Description

Switch Any One of 3 Radios to Any One of 3 amplifiers and/or up to 4 Antennas – The Ultimate in Coax Switching Convenience!

The 3 X 4 Switch Plus with two 1 X 4  Coax Switches  system consists of three  devices:

• 3 X 1 Controller/Switch Unit
• two 1 X 4 Antenna Switch.

The possible switching combinations and versatility of the 3 X 4 Switch Plus two  1 X 4  Coax Switches  is impressive!

The 3 X 4 Coax Switch Plus with two  1 X 4  Coax Switches  is built with a rugged steel chassis, very easy to use front panel controls, and very clearly marked rear-panel connections. We feel so confident that you will be delighted with the 3 X 4 Switch Plus two  1 X 4  Coax Switches, that we offer a 30-day money back with our “no questions asked” guarantee. This switching system represents a new reference point for easy to use amateur radio equipment.

• Front panel switching connects any one of 3 radios to any one of 3 amplifiers and/or up to 4 antennas.
• Capable of easily handling 10,000 watts PEP of RF.
• Greater than -70dB isolation typical.
• Turning a single knob automatically switches and routes radio/amplifier, coax/ ALC and Amplifier keying.
• Automatic switching of radio/amplifier when connected to the iPlus.
• Turning a single knob automatically switches the microphone audio as well as the radio, amplifier COAX/ALC and Amplifier keying when connected to the iPlus.
• Buffered keying of linear amplifier(s).
• Single front panel switch to disconnect keying to linear amplifier(s).
• RCA connectors provided to attach external device for keying control of linear amplifier(s).
• Supports mono and stereo audio switching to a single speaker system.
• Fault-tolerant design prevents damage to radios attached to the switch.
• 19 inch rack mountable!
• Fully assembled and ready to go.

 

 

Click here to see details on 3 X 4 Coax Switch Plus Controller  and 1 X 4 Coax switch  

Using one or more W2IHY 3 X 4 Controllers will greatly simplify operating amateur radio stations with multiple radios, one or more linear amplifiers, and multiple antennas.

The W2IHY 3 X 4 Coax Switch Plus with two 1 X 4 Coax Switches  may be configured in many ways. The following is an example of a typical configuration.

 Configuration 5

This configuration connects up to 3 radios to up to any of up to 3 linear  amplifies and a single meter and tuner, The amp / tuner output(s) are connected to antennas, antenna switches or other devices. This  configuration requires one Coax Switch Controller and two 1 x 4  Coax Switches.